Product Introduction 
The electric centrifuge operates on a high-speed centrifugal dewatering principle. A motor drives the dewatering drum to rotate at high speed, generating centrifugal force that rapidly expels water from pulp or wet samples. The split-body design separates the drum from the motor, effectively preventing water from splashing into the motor. The single-chip microcomputer control system allows precise setting of dewatering time (0.5-30 min), with a digital display showing real-time operating status and remaining time. Users can select between two speeds—1400 r/min or 2800 r/min—depending on sample type and dewatering requirements to achieve optimal results. The dewatered pulp can be directly used for consistency calculation or further analytical testing.

Key Features 
Split-Body Safety Structure Split-body design completely isolates the dewatering drum from the motor, preventing motor burnout caused by water splashing and ensuring safer operation.
Dual Speed for Efficient Dewatering Selectable dewatering speeds of 1400 r/min and 2800 r/min meet the needs of different pulp and sample types with high efficiency.
Single-Chip Microcomputer Control Precise timing and intuitive digital display of operating status and remaining time via a microcontroller system.
Wide Time Setting Range Dewatering time freely adjustable from 0.5 to 30 minutes to suit different moisture content samples and target dewatering levels.
Low Vibration, Low Noise Optimized mechanical structure and dynamic balancing system ensure smooth operation with minimal vibration and noise, suitable for laboratory environments.
Compact Desktop Design Overall dimensions of 460×270×310 mm and a net weight of approximately 18 kg; small and lightweight for easy movement and placement.
Easy Operation and Maintenance Simple structure with intuitive controls for convenient daily cleaning and maintenance, suitable for high-frequency laboratory use.
Multi-Industry Applicability Suitable for pulp dewatering and sampling in production sites and laboratories in the papermaking, textile, and dyeing industries.

Main Technical Specifications 

FAQ 
1. What is the advantage of the split-body structure?
The split-body structure completely isolates the dewatering drum from the motor, so even if water is expelled during operation, it cannot splash into the motor. This fundamentally prevents motor burnout due to water ingress, significantly increasing equipment lifespan and safety.

2. How to choose between the 1400 r/min and 2800 r/min speeds?
1400 r/min is suitable for routine dewatering of general pulp and samples. 2800 r/min generates greater centrifugal force for more thorough and rapid dewatering, ideal for samples with higher moisture content or those requiring more effective water removal. Users can flexibly select based on actual sample characteristics and dewatering requirements.

3. How should the dewatering time be set?
Dewatering time is freely settable from 0.5 to 30 minutes via the timer, with remaining time shown on the digital display. The unit stops automatically when the set time elapses. Users can determine the appropriate time based on sample moisture content and target dewatering degree.

4. What is the primary use of this equipment?
It is primarily used in the pulp and paper industry for measuring pulp consistency (calculated by weighing after dewatering) and collecting samples from dewatered bone-dry pulp. It can also be used for similar sample dewatering in textile and dyeing industries.

5. How should the equipment be cleaned and maintained?
After use, promptly clean residual pulp and water from the dewatering drum, wipe interior and exterior surfaces with a soft cloth, and keep the device dry and clean. Periodically check the tightness of the drum and rotating components. Motor bearings are lubricated at the factory and generally do not require frequent re-oiling.

6. What does the maximum dewatering mass ≤200 g mean?
It means the total mass of wet pulp or wet sample placed in the drum per cycle should not exceed 200 g. Overloading can result in poor dewatering, increased vibration, or even motor damage. Strictly control sample mass within the specified range.

After-Sales Service 
Established in 2007 and with nearly two decades of experience, Shandong Annimet Instrument Co., Ltd. is a professional manufacturer integrating R&D, production, and sales of laboratory testing and sample preparation equipment. Quality is our foundation. We are your bridge from concept to reality. We deliver more than just instruments — we deliver confidence. This Electric Centrifuge comes with a 12-month warranty and lifetime technical support. Our professional team offers 24/7 service response, free installation guidance, operation training, and centrifugal dewatering application consultation. For any inquiries, please contact our customer service team; we are dedicated to providing comprehensive pre-sales, in-sales, and after-sales support. Hotline: 400-9933-057, Email: anmt_test@126.com.