The Annimet Falling Ball Impact Tester is designed to evaluate the breakage of plastic sheets with a thickness of less than 2 mm under the impact of a steel ball dropped from a specified height. It is widely used by quality inspection agencies, pharmaceutical companies, and packaging manufacturers. A specimen of a certain size is cut and clamped in the holder, a suitable steel ball is mounted on the electromagnetic device, and the ball is released to fall freely onto the center of the specimen. The breakage is observed, and the breakage rate is calculated after multiple tests. The instrument complies with multiple national and international standards including YBB00212005-2015, YBB00232005-2015, YBB00222005-2015, YBB00182004-2015, YBB00202005-2015, and YBB00242002-2015. Test height is adjustable from 300 mm to 600 mm, with an optional 300-900 mm range, and the sample thickness range is 0-2 mm. Standard ball diameters are 23 mm, 25 mm, and 28.6 mm, with optional 38.1 mm and 50.8 mm. The specimen is pneumatically clamped and released, and the steel ball is electromagnetically held and automatically released, avoiding system errors caused by human factors. A foot switch, protective device, and centering device make operation user-friendly and results reliable.